Accessories
To cater functional requirements , Racks are supplied with variety of accessories. These items are designed considering, general as well as specific functional aspects of the users.
Base frame :- To have sturdy base for heavy duty cabinets as well as for mounting
heavy items at bottom of the rack, Base frame can be supplied with structural support and plates for mounting the items. Single piece Base frame is made of std. ` C ' Chanels and it's a welded structure . However , Kit formed Base Frames are supplied with Corner Brackets and 2 nos each of Width and Depth supporting plates
Front door : - Front doors are available in plain steel sheet panel, with perspex or acrylic sheet and with toughened Glass. Extruded Aluminium frame is used for Acrylic door with Single point locking arrangement. Steel Frame door with Acrylic or Glass can also be available with single or Three point locking.
Chassis Runner : - These horizontal, formed steel sections , with provision of slots at regular intervals , facilitates mounting of horizontal / vertical Trays / shelves and support angles. Provision of perforation at intervals can also be used for mounting the Telescopic slides at any position in the Cabinet.
Equipment Support `L' Angle : - Light duty or Heavy duty ` L' Angles in 1.6, 2.0 and 3.2 mm thick steel material are available to suit the load requirements for different types of equipment's mounting. These angles provides supports from below the equipment as well as at middle of the equipment for optimum use of front space of the rack.
Recess arrangement of 19" rack mountable profiles : - The Rack , can be vertically split by mounting extruded `L', 19 inch Sub-rack mountable profile at any position depth wise. This arrangement offers proper space utilization at front as well as on the rear side of the sub-rack unit for electrical Installations.
Trays/shelves/chassis : - It is often required to mount Electronic Instrument and equipments other than 19" mountable ,inside the Rack. These units can be placed on the trays or shelves. Stationary type trays can be fixed either to the vertical profiles of the frame or to the chassis runners. For sliding trays , Telescopic slides can be mounted on chassis runners or to the frame profile with standard mounting Brackets at front and rear of the rack . With this arrangement , Using above options Trays can be fixed at any location depth-wise.
Key Board Tray / Drawer : - Key Board trays, are available for standard Key Board of 470 .0 MM width , with Rotary Tray provision on the Main Tray. Arrangement of Mouce Pad can also be made on the tray . This tray, slides on the Telescopic Slides. They are available in Steel fabricated with Aluminium 3.2 MM thick Front Panel. Locking arrangement for the tray is with Cam Lock. Sliding Drawers are available for keeping the stationary and other suitable items . Steel fabricated drawers with Aluminum Front panel and Pulling Handles ,are mounted with Telescopic Slides .
Telescopic slides :- Ball bearing type slides are available with load carrying capacity of 35 Kg. ,These slides facilitates easy movement of equipments out side of the rack , in case of repairs and replacement etc. It is supplied with standard front and rear mounting bracket pairs or can be mounted on chassis Runners. Sizes available are from 16" to 24" of extendable depths.
Castors : - Castors are available, suitable to load carrying capacity, Light duty and heavy duty as Well as with & without breaks. Rack can be supplied with front castors with break and rear plain type.
Lifting Eye-bolt : - Lifting Eye-bolts , made from forged steel and M.12 Threading, are available in Powder coated or Zinc plated finish. These are mounted with sturdy corner Brackets of the Rack / Frame. Set of 4 bolts required for each Rack unit.
Adjustable Legs : - Specially designed , easy to operate and sturdy adjustable Legs can be supplied to withstand load of 500 Kg. These legs facilitates leveling of the rack and are mounted on the corner brackets of the frame.